Plant Tissue Shipping Instructions (Australia)

Due to strict Australian quarantine laws this service is for within Australia only – See Online Ordering for other options.

Plant Tissue Quality and Quantity Requirements

Minimise the risk that the submitted tissues contain pathogenic viruses, bacteria, pest and parasites.

We accept 10-15mg of plant tissue.

The success of gDNA extraction relies on tissue quality from sampling to arrival to our facility. Please use the best methods of sampling and storing your samples prior shipment. These methods depend on the plant and tissue source.

Leaves

Leaves are most commonly used tissue source for plants. We recommend collecting leaves into liquid nitrogen, if feasible, if not on ice blocks or at least on desiccant as silica beads/gels. If possible we recommend lyophilising leaf samples before subsampling into recommended plates for shipment.

Seeds and other plant samples

Seeds do not require special treatment, other than shipping with silica beads/gels.

Tissue samples from museum collections/herbarium/prolonged storage/valuable materials

We recommend that the gDNA form museum collections/herbarium/prolonged storage/valuable material is extracted by our users. If you have to rely on our DNA extraction services we will do our best, however it is critical you alert us that your material is from museum collections/herbarium/prolonged storage/valuable by adding adequate note while placing your order and on the Sample Tracking File in the Comments. Otherwise your samples will be processed using our standard procedures which may not be sufficient for museum collections/herbarium/prolonged storage/valuable tissues.

If shipping internationally the plant tissue MUST be pounded, otherwise the shipment will be ceased by Australian Quarantine Office (AQIS).

If you have any questions, please contact us at samples@diversityarrays.com, we will assist based on experience with large diversity of processed organisms/tissue sources.

Create Order

Sample Packaging

  • Firmly seal all bags (preferably double layer ziplock plastic bags) or alternatively use Parafilm
  • Full contact details to be provided in printed form inside the parcel for the sender of the material, and also for the client to be invoiced (if different)
  • Make sure all our contact details (and yours) are correctly and legibly written, including our phone number, on outside the package.
  • Please include your Service Specification and Sample Tracking File.
  • Package in a rigid box/container with ample packing to allow for rough handling during shipment.

For Plant Tissues, please follow the following instructions:

  • Use ‘MicroTube Rack System™, 1.1mL Single Tubes in Racks’ (from National Scientific Supply Co, Inc. USA, website: nat-sci.com, catalogue numbers TN0946-01R for racks and TN0946-01B for tubes1) or equivalentto allow for our automated plate(s) processing,
  • Label the tubes from either row A or row H with their well positon (for example A1, A2, A3 etc.);
  • Provide around 5-10mg of plant tissue per sample/tube; please contact us () if you have any doubts about tissue size/weight or if you have not used our services for the organism/tissue you plan to send to us before;
  • Use ‘PiercableTPE capband-8 cluster ’ (capmat format from Micronic, The Netherlands, website: micronic.com, catalogue number MP53204M2) or equivalent, to firmly and securely seal the tubes;
  • Make sure that ALL tubes across the rack are tightly sealed;
  • Package the rack(s) with plant tissue samples in a rigid box with ample packing (bubble wrap or similar) to allow for rough handling during shipment;

1 Please use the link http://nat-sci.com/product/mtrs-racks-and-tubes/ while navigating for the recommended product.

2 Please use the link https://www.micronic.com/product/tpe-push-caps while navigating for the recommended product.

Ship to Address

Diversity Arrays Technology
Building 3, Level D,
University of Canberra Bruce, ACT 2617
Australia

Courier Instructions

Lat: -35.236712
Long: 149.084286

  1. Enter Allawoona St from Ginninderra Dr.
  2. Right into Broula St
  3. Right into Kirinari St
  4. Left into Monana St – Building 3, 5.
  5. Level D – Top (South West end)

Notify DArT

When you ship the package email us at samples@DiversityArrays.com the:

  • Name of the courier company;
  • The tracking number from the courier; and
  • The Service Number (from step 1).

Warning: Failure to carefully follow all these instructions will cause delays in your order reaching us and a high probability of samples arriving that we cannot process.

Page last updated: March 18, 2019, 4:27 pm